Collection of ten pieces of Space Shuttle hardware:
Space Shuttle Cryogenic Relief Valve, measuring 17.5″ x 8″ x 6.5″, mounted on a 12″ x 8″ board, marked: "V070-454374-001, 03953-090486." The base of the main valve reads: "Valve, Press. Relief, Cryog, H2, Type II CL 2, Parker-Hannifin P/N 5750002-101, MC 284-0440-0002, Mfg Date 11/5/75…SN: 92003 T7463 0001."
Space Shuttle Cryogenic Relief Valve, measuring 17.5″ x 8″ x 6.5″, mounted on a 12″ x 8″ board, marked: "V070-454374-001, 03953-090484." The base of the main valve reads: "Valve, Press. Relief, Cryog, H2 Type II CL 2, Parker-Hannifin P/N 5750002-101, MC 284-0440-0002, Mfg Date 11/5/75, FSN/NATO, Code. Lot. SN: 92003 T7463 0003."
Sealed package of unused fecal/emesis bags, folded to an overall size of 7″ x 6.75″ x 1.75″, marked on the packaging: "Part Name - Fecal Emesis Collection Bag, G. E. Part No. 47A232804P1, Contract No. M9J7XSG-485039D, Buyers Control No. MC282-0069-002, Ident. Code 60852, Mfr'r. Flurolon Corp., Package Lot No. A-25, Mfr'r. Date 1/84." The topmost bag is marked: "Buyer's Control No. MC282-0069-0002, G.E. P/N 47A232804P1, FCC-S/N 256."
Two pieces of Space Shuttle thermal insulation, each measuring 6.5″ x 1.5″, both sealed in plastic and marked "V070-390242-021." Sealed with each strip are inspection tags marked "No Shortage," dated September 25, 1979.
Light gray Space Shuttle valve panel, measuring 4.5″ x 6″, with seven valve holes, labeled: "Oxygen," "H2O Supply," "LCG Supply EV1," "LCG Supply EV2," "LCG Return EV2," "LCG Return EV1," and "H2O Waste Return." The reverse is marked with part numbers, "V070-643208-001, 03953 J86151."
Space Shuttle Electrical Interface Panel, measuring 10″ x 7.75″, marked with part numbers on the reverse, "V070-703924-002 ASSY, 03953-A33949." The panel has ports labeled "J1" through "J7," as well as one marked "30V74A48-J6," with "J4," "J7," and "30V74A48-J6" filled with blanks. Two spring-loaded screws are present at the bottom, and the panel retains its wiring harness to the rear.
Space Shuttle Track Installer Reel Assembly, measuring 9.25″ x 4″ x 3″, with locking lever to left side for control of cable plate and pulley system, caption to upper right, "Load 18 LBS. Nominal," and parts label below: "Reel Assy Track Installer, Stk. No. OCN 236731, Ser. 002, Pt. No. G070-550084-013, Model: H70-0561, Contr. NAS-9-14000." Small sticker to left side marked "236, 731."
Early Space Shuttle dual check valve, measuring 17.5″ long and 3″ at its widest point, marked on the side, "Valve Dual Check, Part No. 5760024104 SN 243G080908, RI Part No. MC2840515-0004, Mfg Date 1Q77…Engineering Test, Z02043."
Space Shuttle Radiation Detector High-Fidelity Mock-Up, measuring 10.25″ x 2.75″ x 5″, with one side marked: "BDX, T44430, SN-001." The mock-up has an attached faux "Remove Before Flight" cap in bright orange, marked "T43800."
In overall very good to fine condition.
